|
|
The "smart" model is a small, handy universal mixing pump from m-tec for small quantities (in buckets and bags, wet materials).
Materials: adhesives, joint fillers, levelling compounds, fillers, wet materials and dry finishing coats.
Arguments for smart;
• Lightweight and easy to transport.
• Easy to dismantle, saves space.
• Easy to handle.
• Low investment costs.
• Various fields of application.
• Easy-to-clean polymer mixing chamber.
Specifications;
Electrical data: 230 V, 50 Hz, single-phase
Water connection: ½" water hose with Geka coupling
Mixing and pumping capacity: approx. 6 l/min
Pumping distance: approx. 10 m through ¾" hose for self-levelling compound
Drive motor: 230 V, 50 Hz, single-phase, 1800 W, dual-speed gear unit with electronic speed control (CW/CCW run), max. speed 650 rpm
Weight: approx. 45 kg
Dimensions: 1000 x 540 x 1000 mm
Download Datasheet
Part Numbers For Ordering / Queries:
664200 - m-tec smart II 1.8kW, 230v
664110 - m-tec smart II 1.8kW, 110v
|
|
|
Applications: machine-applicable internal and external plasters/renders, flowing screeds/levelling compounds, adhesives and reinforcing mortars.
System/performance: single-stage mixing system: worm pump, standard capacity approx. 20 l/min, up to 20 m away and 10 m high.
Feed: solely for use with bagged material.
Arguments for mono-mix;
• For inner and outer plaster mortars, also available as floor screed version.
• Easy to assemble and dismantle.
• Easy to transport by dismantling (heaviest component 75 kg).
• Slim shape, fits through any door (extra manoeuvrability with 4 wheels).
• Easy to operate.
• Hose pressure gauge in the scope of supplies.
• Immediately ready for operation as it is fully equipped.
• 230 V single-phase power supply.
• Simple and universal.
Specifications;
Pumping output: approx. 20 l/min / approx. 5 -20 l/min
Pumping distance: up to 20 m / up to 20 m
Pumping height: up to 10 m / up to 10 m
Pumping pressure: up to 20 bar / up to 20 bar
Geared motor: 2.2 kW, 230 V, 50 Hz, single-phase, 260 rpm / 3 kW, 230 V,50 Hz, three-phase, 260 rpm
Air compressor: 1.1 kW, approx. 250 l/min, 4 bar / 1.1 kW, approx. 25 l/min, 4 bar
Electrical data: 230 V, 50 Hz, single-phase, fuse protection: 16 A, plug: 16 A, 3 Pin, 6 h, shock-proof, supply cable:3 x 2.5 mm², current value: 16A
Water supply: ¾" water hose with Geka coupling, required water pressure 2.5 bar min., with the machine running
Dimensions: approx. 1,430 x 670 x 1,150 mm
Filling height for bagged material: 1,000 mm
Weight: approx. 160 kg
Download Datasheet
Part Numbers For Ordering / Queries:
603000 - m-tec mono-mix 2.2 kW, 230v
603005 - m-tec mono-mix FU 3.0 kW, 230v
603100 - m-tec mono-mix 5.5 kW, 400v
|
|
|
The revolutionary technology of the m-tec M300 makes it a mixing pump of the next machine generation.
Until today, single stage mixers have been needed for both the dosing and the mixing processes. Now, the M300 can concentrate entirely on the actual task of pumping.
This is made possible by it's single chamber mixing utilising the wet sump principle, which provides a particularly high-quality mix of the materials. In addition this technology guarantees a steady consistency in the mixing chamber, thereby eliminating thick-thin fluctuations.
The easy cleaning of the PU components is also a significant advantage. Caked-on material is a thing of the past, substantially increasing the lifetime of the pump and mixing shaft at the same time.
Arguments For M300:
• single chamber mixing utilizing the wet sump principle: products will be mixed to an optimum
• Long life of the pump made possible by single chamber mixing
• Longer conveying distances with minimum worm pump wear
• Easy cleaning: PU-components have a markedly lower tendency to caking than comparable steel components.
• Can be used for almost any product
• Easy to assemble and dissamble without any tools
• Slim shape, fits through any door (owing to modular system)
• Exchangeable flange for various screw pumps
• water pump build-in as standard
• No water return into the dry material zone
Specifications;
Pumping capacity: approx. 24 l/min as standard supply, (6-47 l/min depending on worn pump)
Pumping distance: up to 50m
Pumping height: up to 30m
Pumping pressure: up to 30 bar
Feed screw: 2.2kW, 400V, 50Hz
Mixing pump: 4.0kW, 400V, 50Hz
Air compressor: 0.9kW, approx. 250 l/min, 4 bar
Water pump: 0.3kW, approx. 40 l/min, 4 bar
Electrical data: 400V, 50Hz, 3ph
Fuse: 25 A
Cable: 5 x 4.0mm2
Connector: 32 A, 5p, 6h
Water Connection: 3/4" hose with GEKA coupling; required water pressure 2.5 bar when the machine is running
Dimensions: approx. 1650 x 640 x 1470 mm
Weight: approx. 270kg
Download Datasheet
Part Numbers For Ordering / Queries:
610000 - M300 400V 50Hz 3ph
|
|
|
Applications: masonry mortars, plasters/renders, self-levelling floor screeds, adhesives and reinforcing mortars.
System/performance: single-stage mixing technique, feed screw, mixing/pumping at 5 -50 l/min, depending on worm pump used. Standard - 22l/min up to 60 m away and 30 m high.
Feed: bagged or silo materials in conjunction with filter hood or feeding hood.
Options: filter hood, feeding hood, various worm pumps, after mixer, mixing shaft for insulating plaster, flexible hoses, spray equipment.
Arguments for m3 proF;
• Automatic phase-sequence detection; the wrong sense of rotation is a typical construction site problem which is now ruled out as a result of the automatic reversing system.
• Fault indication by means of simple, intuitive display
• Easy to use, user-friendly operation using intuitively designed control panel.
• For any machine-processable internal and external plaster mortars as well as for self-levelling floor screeds.
• Easy to assemble and dismantle without any tools.
• Slim shape, fits through almost any door.
• Easy to operate.
• Compact, easy to transport.
• Robust and well suited to construction sites.
• Exchangeable flange for different pump sizes.
• Immediately ready for operation due to full scope of supplies.
• Easy to operate.
Specifications;
Pumping output: (5 -50 l/min, depending on worm pump) approx. 22 l/min as standard
Pumping distance: up to 40 m
Pumping height: up to 20 m
Pumping pressure: up to 30 bar
Geared motor (feed screw): 0.9 kW, 220/400 V, 50 Hz, 39 rpm
Geared motor (mixing pump): 5.5 kW, 220/400 V, 50 Hz, 400 rpm
Air compressor: 0.9 kW, approx.250 l/min, 4 bar
Water pump: 0,3 kW, ca.40 l / min, 8 bar
Electrical data: 400 V, 50 Hz, three-phase, fuse protection: 25 A, plug: 32A, 5 Pin, 6 h, supply cable:5 x 4.0 mm², current value: 17 A
Water supply: ¾" water hose with Geka coupling, required water pressure 2.5 bar min., with the machine running
Dimensions: approx. 1,100 x 700 x 1,050mm
Filling height for bagged material: approx. 950 mm
Weight: approx. 220 kg (without accessories)
Download Datasheet
Part Numbers For Ordering / Queries:
602080 - m-tec m3 proF / Series 417, 400v
|
|
|
Applications: masonry mortars, plasters, self-levelling floor screeds, adhesives and reinforcing mortars.
System/performance: dual mixing system continuous mixer, 5-60 l/min pump output, depending on pump used, standard capacity 22 l/min, up to 60 m away and 30 m high.
Filling: dry - bagged or silo material through feeding hood or conveying system, liftbag. Wet: materials in buckets through mixing chamber with hopper, or PE bags through bag mangle.
Options: filter hood, feeding hood, various worm pumps, after mixer, flexible hoses, spray equipment, mixing chamber with hopper.
Arguments for duo-mix Plus;
• Can be used with many products.
• Easy to assemble and dismantle without any tools.
• Slim shape, fits through any door.
• Change flange for various worm pumps.
• Water pump built-in as standard.
• No water return into the dry material zone.
• Slaking principle: products will be mixed better.
• Longer life of the pump owing to dual mixing system.
• Longer delivery distance with the same wear.
• Robust, suited to construction sites, extremely easy to maintain.
Specifications;
Pumping output: between 5 and 60 l/min, depending on worm pump, standard approx. 22 l/min
Pumping distance: up to 60 m
Pumping height: up to 30 m
Pumping pressure: up to 30 bar
Geared motor (mixing zone): 3 kW, 220/400 V, 50 Hz, 260 rpm
Geared motor (pumping zone): 5.5 kW, 220/400 V, 50 Hz, 400 rpm
Air compressor: 0.9 kW, approx. 250 l/min, 4 bar
Water pump: 0.75 kW, approx. 40 l/min, 6 bar.
Electrical data: 400 V, 50 Hz, three-phase, fuse protection: 25 A, plug: 32A, 5 Pin, 6 h, supply cable: 5 x 4.0 mm², current value: 23 A
Water supply: ¾" water hose with Geka coupling, required water pressure2.5 bar min., with the machine running
Dimensions: approx. 1,350 x 640 x 1,390mm
Filling height for bagged material: 1,020 mm
Weight: approx. 250 kg (without accessories)
Download Datasheet
|
|
|
Applications: Gypsum Plasters, cement-based renders, external insulation systems, textured paints, flowing screeds (Gypsum or cement based), concrete repair and fire protection materials.
System/performance: dual mixing technique: continuous mixer, 1-60 l/min pump output, infinitely variable (depending on worm pump), standard output range 3 -22 l/min, up to 60 m away and 30 m high.
Filling: Dry - bagged or silo material through delivery hood or conveying system, liftbag. Wet: materials in buckets through mixing pipe with hopper, or PE bags through bag mangle.
Options: filter hood, feeding hood, various worm pumps, after-mixer, flexible hoses, spray equipment, mixing chamber with hopper.
Arguments for duo-mix Plus;
• Can be used for almost any products (Gypsum Plasters, cement- based renders, external insulation systems, textured paints, flowing screeds (Gypsum or cement based), concrete repair and fire protection materials).
• Easy to assemble and dismantle without any tools.
• Slim shape, fits through any door (owing to modular system).
• Exchangeable flange for various screw pumps.
• Water pump built-in as standard.
• No water return into the dry material zone.
• Slaking principle: products will be mixed to an optimum.
• Longer life of the pump made possible by dual mixing system.
• Longer conveying distances with minimum worm pump wear.
• Variable power by frequency inverter.
Specifications;
Pumping Output: sinfinitely variable between 1 and 60 l/min (depending on worm pump used), standard 3 - 22 l/min
Pumping distance: up to 60 m
Pumping height: up to 30 m
Pumping pressure: up to 30 bar
Geared motor (mixing zone): 3 kW, 230/400 V, 50 Hz, 260 rpm
Geared motor (pumping zone): 5.5 kW, 230/400 V, 50 Hz, 80-400 rpm
Frequency inverter: 7.5 kW, 400 V, 50-60 Hz
Compressor: 1.1 kW, approx. 300 l/min, 4 bar max.
Water pump: 0.75 kW, approx. 50 l/min, 6 bar max.
Electrical data: 4400 V, 50 Hz, three-phase, fuse protection: 25 A, plug: 32 A, 5 Pin, 6 h, supply cable: 5 x 4.0 mm², current value: 24 A
Water supply: ¾" water hose with Geka coupling, required water pressure 2.5 bar min., with the machine running
Dimensions (LxBxH): approx. 1,350 x 640 x 1,500mm
Filling height for bagged material: 1,020 mm
Weight: approx. 260 kg (including accessories)
Download Datasheet
|
|
|
 |
